The DaVinci Jumpsuit

Customize your suit by choosing colors*, fabrics, and options. After placing the order you will be contacted for shipping details and an invoice of the remaining shipping fees will be included.

*Designs with more than 4 colors will incur a $75 fee per extra color. After placing the order this fee will be added to the invoice. By clicking the "Start" button below you agree to these terms.

Please complete each section carefully to ensure we produce exactly the suit you want.

>> RUSH DETAILS >>

1. LEAD TIMES are listed on the home page.
2. RUSH SERVICES are not available when orders have SPECIALTY ARTWORK, as artwork can add an extra 2 weeks.
3. Standard Rush completes the order in half of the lead time, ex. 6-7 week lead time with a standard rush = completed order in 3-4 weeks.
4. Double Rush = completed order in half the standard rush, no less than 2-3 weeks.
5. Rush services are only charged once availablility is confirmed.

For any questions, please email: orders@tonysuits.com

This model is designed with a little extra added to the circumference of the chest and waist, arms and legs. This option reduces the amount that is added, to help keep a faster fall-rate.

The suit is made to the inseam measurements provided.

STOP YANKING ON YOUR SPANDEX SLEEVES!

It damages the stitching and causes early onset of alterations.

Add zippers and add peace to your disrobing.

By selecting this option you are choosing to have a one-of-a-kind design from Da'Kine Rags! For more information, check out the Da'Kine Rags Signature Page >> https://www.tonysuits.com/shop/signature-series/dakine-rags/

This model is designed to have a little extra added to the circumference of the chest and waist, arms and legs.

The suit has a little extra room added to the upper leg measurement, to account for the adjustment of the leg straps on a skydiving harness.

This model is designed with a little extra added to the circumference of the chest and waist, arms and legs. This option adds more to the circumference, for those that need a little more drag for their fall-rate.

Double-layer with Cordura outer, 4-Ply inner, with a ZP lining.

Double-layer with Cordura outer, 4-Ply inner, with a ZP lining.

Single layer of a Slip-on Sleeve with the BC Power Foam Insert

By selecting this option you are choosing to have a designer to consult with you on creating a one-of-a-kind design. For more information you can call our office at (813) 788-4753.

Save Your Bootie! This little extra [magnet] helps keep you from walking on your booties. Includes an extra magnet at the top of the zipper, which connects to the pre-existing magnet at the bottom of the bootie. Only available for Inseam Zips.

Save Your Bootie! This little extra [magnet] helps keep you from walking on your booties. Includes an extra magnet at the top of the zipper, which connects to the pre-existing magnet at the bottom of the bootie. Only available for Inseam Zips.

For those that need to slow their fall-rate.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

NOT FOR BEGINNER SKYDIVERS.

The Ridges prevent "flapping" that can occur when the bootie is disengaged.

The bungees are inside these ridges and maintain tension between the knee and toe.

Design credit for this invention goes to Arizona Airspeed!

- Not necessary for camera fliers as they're not disengaging the bootie as frequently.

The leg zipper allows for the wearer to open the leg before gracefully sliding the shoe through. The alternatives are to take your shoe off, or hop around on one leg until the appendage is released from the suit.

Inseam zipper : reaches to the top of the knee

Back of leg zipper : reaches between 8" - 10" from elastic at hem.

Add leg zippers and save yourself from smearing the inside of your suit with whatever is on the bottom of your shoe.

For those that need to slow their fall-rate.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

NOT FOR BEGINNER SKYDIVERS.

For those that need to slow their fall-rate.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

NOT FOR BEGINNER SKYDIVERS.

The Bootie Tuck is a special feature that allows the toe of the bootie to be tucked-away into an internal pocket, preventing the bootie from flapping when not in use.

The leg zipper allows for the wearer to open the leg before gracefully sliding the shoe through. The alternatives are to take your shoe off, or hop around on one leg until the appendage is released from the suit.

Inseam zipper : reaches to the top of the knee

Back of leg zipper : reaches between 8" - 10" from elastic at hem.

Add leg zippers and save yourself from smearing the inside of your suit with whatever is on the bottom of your shoe.

About 1" in diameter

About 1" in diameter

About 1" in diameter

About 1" in diameter

About 1.5" in diameter

About 1.5" in diameter

About 1.5" in diameter

About 1.5" in diameter

About 2" in diameter

About 2" in diameter

About 2" in diameter

Standard colors will be a range of grey, white, and black.

Embroider a name onto the suit. Must choose font type, thread color, and location.

Whether you're looking for sponsor logos for a team suit or simply want to add a little extra to your new suit, we're more than happy to provide additional customization and embroidery for your jumpsuit.

To request additional customization, note your requirements in the 'details' box and we'll be in touch to request the necessary files and provide a quote.

NEW Measurements! As of 7/30/2022

Record your height in inches.

Record your weight in pounds.

MEASURE the circumference of the shoe.

Wear the same shoes that are worn for skydiving.

If multiple types of shoes are worn, measure the larger shoe.

MEASURING the Neck Circumference at Center *New

Measure around the center of the neck, usually around the Adam's apple.

MEASURING the Neck circumference at base

Measure around the base of the neck. At the front of the neck, the tape measure rests at the top of the collarbone, gently snug against the neck.

MEASURING the Length from Neck to Nipple (Bust Level) *New

To find the starting point: hold a pen vertically behind the ear, and where it meets the base of the neck is the starting point.

A diagonal measurement from the neck to the nipple.

MEASURE the Chest Circumference at Nipple Level

Raise the arms and place the tape measure around the back and underneath the armpits, level with the nipples.

Lower the arms and take equal, measured breaths.

Make sure the tape measure is level.

Jumping in cold weather = wear the thick clothing while being measured.

MEASURING the Circumference of the Upper Chest

Raise the arms and place the tape measure around the back and underneath the armpits. Lower their arms and take equal, measured breaths.

Make sure the tape measure is level.

Jumping in cold weather = wear the thick clothing while being measured.

MEASURING the Lower Chest Circumference *New

Measure the circumfrence of the torso below the pectoral muscles.

On women this is level with the band of the bra.

MEASURING the Length of Back to Armpit, from neck *New

A vertical measurement along the spine, from the back of the neck to the level of the armpits. Do not angle toward armpit.

MEASURING the Width of Back Chest *New

Measure horizontally across the back, level with the top of the armpits.

MEASURE the Waist circumference

MEASURING the Length of Torso to Waist, from Front of Neck

Begin by squaring the shoulders over the hips.

A vertical measurement starting between the collar bones, straight down the center line to the waist level.

MEASURING the Length of Torso to Waist, from Back of Neck*New

Begin by squaring the shoulders over the hips.

A vertical measurement along the spine, from the back of the neck to the waist level.

MEASURING the Upper Hip Circumference *New

A horizontal measurment at the top of the hip bones.

Lower Hip and Butt Circumference

MEASURING the Top of Thigh Circumference

Holding the measuring tape parallel to the ground, measure the circumference of the highest point of the thigh.

MEASURING the Mid-Thigh Circumference *New

Keep the tape perpendicular to the ground.

Measure halfway between the upper thigh and the knee.

MEASURING the Upper Knee Circumference, 90 degree bend

Raise the knee up to a 90 degree angle.

Measure above the kneecap, around the base of the thigh.

MEASURING Above Knee Circumference, straight leg *New

Standing with no bend in the knees, hold the tape parallel to the ground, and measure the circumference of the upper knee, just above the kneecap.

MEASURING the Mid-Knee Circumference, straight leg *New

Standing with no bend in the knees, hold the tape parallel to the ground, and measure the circumference of the mid-knee, centered to the kneecap.

MEASURING the Calf Circumference

Measuring tip for those with large calf muscles,

Lifting the heel will engage the calf muscle. Stand with the toe on the edge of a surface and lift the heel.

MEASURE the Upper Ankle Circumference

Keep tape perpendicular to the ground.

MEASURE the Ankle Bone Circumference

Keeping tape perpendicular to the ground, run the tape over the ankle bone, measuring the circumference.

MEASURING the Shoulder Width

The best reference for this is between the two prominent bones at the shoulder edges or imagine a line straight up from your armpits to your shoulders and measure between those two points (note the dotted lines in the picture).

The shoulder (D), shoulder to elbow (C) and elbow to wrist (B) are continuous measurements. These 3 measurements place the grips in the correct location on the upper arm and define the seam between the upper arm and the spandex forearm.

MEASURING the Length of the Upper Arm, Shoulder to Elbow

Mark the end point on the (D) measurement with the your finger, reset the tape and measure down to the center of the elbow with the arm bent in a 90 degree position.

The shoulder (D), shoulder to elbow (C) and elbow to wrist (B) are continuous measurements. These 3 measurements place the grips in the correct location on the upper arm and define the seam between the upper arm and the spandex forearm.

MEASURING the Length of the Lower Arm, Elbow to Wrist

Mark the end point on the (C) measurement with your finger, reset the tape and measure down to the wrist where the wrist bends just past the wristbone (not onto the hand).

The shoulder (D), shoulder to elbow (C) and elbow to wrist (B) are continuous measurements. These 3 measurements place the grips in the correct location on the upper arm and define the seam between the upper arm and the spandex forearm.

MEASURING the Length of the Upper Arm, Neck to Elbow at 90 degrees, *New

To find the starting point: hold a pen vertically behind the ear, and where it meets the base of the side of the neck is the starting point.

A measurement along the arm, starting at the neck and ending at the elbow. Arm is at a 90 degree angle.

MEASURING the Length of the Entire Arm, Neck to Wrist, *New

To find the starting point: hold a pen vertically behind the ear, and where it meets the base of the side of the neck is the starting point.

A measurement along outside edge of the arm, starting at the neck, going over the elbow, and ending at the wrist. Arm is at a 90 degree angle.

MEASURING the Length of the Entire Arm, Collarbone to Wrist

Measure one arm first, and then compare to the second arm. Use the longer measurement.

Hold the arm up, perpendicular to the ground, and in line with the shoulder.

Measure from the center of the collarbone to the wrist.

MEASURING the Shoulder Joint Circumference *New

Measure the entire shoulder joint circumference, with the arm lowered and flexed.

The tape will need to pass under the armpit.

MEASURE the Bicep Circumference

MEASURE the Elbow Circumference

Straight arm.

MEASURE the Elbow Circumference, 90 Deg. Bend *New

Measure the circumference of the elbow, inside the elbow crease.

Bend elbow to 90 degrees.

MEASURE the widest part of the forearm.

MEASURE the Wrist Circumference

NEW: Press the tape measure against the front and back of the torso.

Square shoulders over hips.

Hold the tape measure against the center of the collarbone.

Run the tape down the torso's center line, between the legs (over the crotch), and up the back to the base of the neck.

MEASURING the Crotch Length, from waist *New

A measurement from front of the waist to the back of the waist, passing the tape measure between the legs, and over the crotch.

MEASURING the Length of Torso to Seat, from Back of Neck *New

Begin seated on a flat surface, with the shoulders squared over the hips.

Measure vertically from the back of the neck, down along the spine, ending at the flat surface, pressed against the body -including the lower back.

MEASURING the Length of Lower Body, from Waist to floor *New

A vertical measurement from the side of the waist, along the body, to the floor. Wear shoes.

NEW: Press the tape measure against the leg.

Stand with feet hip width apart and shoulders over the hips.

Hold the tape measure against the center of the crotch, where all seams intersect. Measure along the leg to the TOP of the knee.

NEW: Press the tape measure against the leg.

Stand with feet hip width apart, and shoulders over the hips.

Hold the tape measure against the center of the crotch, where all seams intersect. Measure along the leg to the floor, wearing shoes.

We respect your privacy and will not share your contact information.

Please use the Additional Information box to detail any special requirements or requests.

MILITARY: DO NOT 'ADD TO CART'. Instead, select SAVE FOR LATER (to the left, above 'ORDER') and email the link with proof of active military service. If you 'ADD TO CART' your card will be charged and the military discount will be added as a credit to be used for any TonySuits products.

Email: info@tonysuits.com

You can save your suit design now and return to it at a later time.

Congratulations! You're just a few clicks away from owning your custom designed TonySuit.

Simply add your suit to your Shopping Cart and you're on your way!