Tony Original

Customize your suit by choosing colors*, fabrics, and options. After placing the order you will be contacted for shipping details and an invoice of the remaining shipping fees will be included.

*Designs with more than 4 colors will incur a $75 fee per extra color. After placing the order this fee will be added to the invoice. By clicking the "Start" button below you agree to these terms.

Please complete each section carefully to ensure we produce exactly the suit you want.

>> RUSH DETAILS >>

1. LEAD TIMES are listed on the home page.
2. RUSH SERVICES are not available when orders have SPECIALTY ARTWORK, as artwork can add an extra 2 weeks.
3. Standard Rush completes the order in half of the lead time, ex. 6-7 week lead time with a standard rush = completed order in 3-4 weeks.
4. Double Rush = completed order in half the standard rush, no less than 2-3 weeks.
5. Rush services are only charged once availablility is confirmed.

For any questions, please email: orders@tonysuits.com

This model is designed with a lot of extra material added to the circumference of the torso, arms and legs. This option reduces the amount of extra material added, to decrease the amount of drag and aid the fall-rate.

The suit is made to the inseam measurements provided.

Worn on your forearms, under your suit, providing MAXIMUM surface area and slow fall drag potential.

Worn on your forearms, under your suit, providing MAXIMUM surface area and slow fall drag potential.

Worn on your forearms, under your suit, providing MAXIMUM surface area and slow fall drag potential.

By selecting this option you are choosing to have a one-of-a-kind design from Da'Kine Rags! For more information, check out the Da'Kine Rags Signature Page >> https://www.tonysuits.com/shop/signature-series/dakine-rags/

This model is designed with a lot of extra material added to the circumference of the torso, arms and legs.

The suit has a little extra room added to the upper leg measurement, to account for the adjustment of the leg straps on a skydiving harness.

By selecting this option you are choosing to have a designer to consult with you on creating a one-of-a-kind design. For more information you can call our office at (813) 788-4753.

Slows the fall-rate. NOT FOR BEGINNER SKYDIVERS.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

Not available with Ridges or Foam Knees.

Save Your Bootie! This little extra [magnet] helps keep you from walking on your booties. Includes an extra magnet at the top of the zipper, which connects to the pre-existing magnet at the bottom of the bootie. Only available for Inseam Zips.

Save Your Bootie! This little snap helps keep you from walking on your booties. Includes an extra snap at the top of the zipper, which connects to the pre-existing snap at the bottom of the bootie. Only available with Inseam Zips.

Slows the fall-rate. NOT FOR BEGINNER SKYDIVERS.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

Not available with Ridges or Foam Knees.

For those that need to slow their fall-rate.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

NOT FOR BEGINNER SKYDIVERS.

Save Your Bootie! This little snap helps keep you from walking on your booties. Includes an extra snap at the top of the zipper, which connects to the pre-existing snap at the bottom of the bootie. Only available with Inseam Zips.

For those that need to slow their fall-rate.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

NOT FOR BEGINNER SKYDIVERS.

The Ridges provide more bootie control and power.

Ridges WITH bungees. The bungees are inside these ridges and maintain tension between the knee and toe. When the bootie isn't engaged, the bungees pull the bootie against the leg.

Ridges WITHOUT bungees. When the bootie isn't engaged, the bootie material is used as drag.

Design credit for this invention goes to Arizona Airspeed!

The Ridges provide more bootie control and power.

Ridges WITH bungees. The bungees are inside these ridges and maintain tension between the knee and toe. When the bootie isn't engaged, the bungees pull the bootie against the leg.

Ridges WITHOUT bungees. When the bootie isn't engaged, the bootie material is used as drag.

Design credit for this invention goes to Arizona Airspeed!

The Ridges provide more bootie control and power.

Ridges WITH bungees. The bungees are inside these ridges and maintain tension between the knee and toe. When the bootie isn't engaged, the bungees pull the bootie against the leg.

Ridges WITHOUT bungees. When the bootie isn't engaged, the bootie material is used as drag.

Design credit for this invention goes to Arizona Airspeed!

The leg zipper allows for the wearer to open the leg before gracefully sliding the shoe through. The alternatives are to take your shoe off, or hop around on one leg until the appendage is released from the suit.

Inseam zipper : reaches to the top of the knee

Back of leg zipper : reaches between 8" - 10" from elastic at hem.

Add leg zippers and save yourself from smearing the inside of your suit with whatever is on the bottom of your shoe.

The Ridges provide more bootie control and power.

Ridges WITH bungees. The bungees are inside these ridges and maintain tension between the knee and toe. When the bootie isn't engaged, the bungees pull the bootie against the leg.

Ridges WITHOUT bungees. When the bootie isn't engaged, the bootie material is used as drag.

Design credit for this invention goes to Arizona Airspeed!

Special bootie feature that allows the bootie toe to be tucked-away into an internal pocket, preventing the bootie from flapping when not in use.

Slows the fall-rate. NOT FOR BEGINNER SKYDIVERS.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

Not available with Ridges or Foam Knees.

Slows the fall-rate. NOT FOR BEGINNER SKYDIVERS.

A 4" mesh vent is installed right beneath the knee panel.

The air enters this vent and inflates a ZP sack sewn on the inside of the bootie, creating a tremendous amount of drag and responsiveness.

Not available with Ridges or Foam Knees.

The leg zipper allows for the wearer to open the leg before gracefully sliding the shoe through. The alternatives are to take your shoe off, or hop around on one leg until the appendage is released from the suit.

Inseam zipper : reaches to the top of the knee

Back of leg zipper : reaches between 8" - 10" from elastic at hem.

Add leg zippers and save yourself from smearing the inside of your suit with whatever is on the bottom of your shoe.

About 1" in diameter

About 1" in diameter

About 1" in diameter

About 1" in diameter

About 1.5" in diameter

About 1.5" in diameter

About 1.5" in diameter

About 1.5" in diameter

About 2" in diameter

About 2" in diameter

About 2" in diameter

The stitches are a different color than the material its being sewn onto.

Men's Gildan Heavy Cotton T-Shirt with TonySuits single logo.

100% Cotton, preshrunk

Color shown: Heather

Men's Next Level Shirt with TonySuits single logo.

VERY SOFT!

60% Cotton, 40% Polyester

Men's Gildan Heavy Cotton T-Shirt with TonySuits WRAP logo.

100% Cotton, preshrunk

Color shown: Sky Blue

Women's sky blue shirt with wrap-around TonySuits logo.

Manufacturer: Bella

100% Cotton

Women's Next Level tank top with TonySuits single logo.

VERY SOFT!

57% Cotton, 38% Polyester, 5% Spandex

Embroider a name onto the suit. Must choose font type, thread color, and location.

Whether you're looking for sponsor logos for a team suit or simply want to add a little extra to your new suit, we're more than happy to provide additional customization and embroidery for your jumpsuit.

To request additional customization, note your requirements in the 'details' box and we'll be in touch to request the necessary files and provide a quote.

Mark the end point on the (D) measurement with the your finger, reset the tape and measure down to the center of the elbow with the arm bent in a 90 degree position.

The shoulder (D), shoulder to elbow (C) and elbow to wrist (B) are continuous measurements. These 3 measurements place the grips in the correct location on the upper arm and define the seam between the upper arm and the spandex forearm.

MEASURE the circumference of the shoe.

Wear the same shoes that are worn for skydiving.

If multiple types of shoes are worn, measure the larger shoe.

We respect your privacy and will not share your contact information.

Please use the Additional Information box to detail any special requirements or requests.

MILITARY: DO NOT 'ADD TO CART'. Instead, select SAVE FOR LATER (to the left, above 'ORDER') and email the link with proof of active military service. If you 'ADD TO CART' your card will be charged and the military discount will be added as a credit to be used for any TonySuits products.

Email: info@tonysuits.com

You can save your suit design now and return to it at a later time.

Congratulations! You're just a few clicks away from owning your custom designed TonySuit.

Simply add your suit to your Shopping Cart and you're on your way!